High Pressure WaterJet Packing Extractors
Next Generation Professional Grade High Pressure Ultrasonic Packing Extractor
Rental units are available.
The Pro-Grade L6000 and L9000 Series water jet packing extractors are compact, light weight and feature rugged construction. The development of the new Pro-Grade Series was coupled with the expertise of Fluid Sealing Service in valve packing extraction systems, manufacturing and field services to produce these hard working packing extraction system.
These systems has been specifically engineered to rapidly and efficiently remove packing from heavily coked valves in hydrocarbon service without damaging any of the valve components. It eliminates the risk of scoring or gouging a valve stem or stuffing box bore, or flange face caused by out-dated manual extraction methods. Packing extraction in steam service is significantly faster. This system has been designed for fast and efficient removal of valve stem packing, pump packing and flange gaskets.
No electrical components for safe, non sparking operation. Explosion proof. Operates using plant air and water. light weight for operating in tight spaces. Reduced labor cost/One man operation.
Our units can be shipped world-wide and on-site training sessions are available.
The new Pro-Grade L6000 Series
packing extractors are compact, light weight and feature rugged construction.
The development of the new L6000 Series was coupled with the
expertise of Fluid Sealing Service in valve packing extraction system
manufacturing and field services to produce this hard working packing extraction
This system has been specifically engineered to rapidly remove packing from
heavily coked valves in hydrocarbon service without damaging any of the valve
components. Packing extraction in steam service is significantly faster.
High velocity air-powered, light weight, packing extraction system incorporates
a high velocity liquid burst system. A compact unit, the Pro-Grade Jet
Burst Extractor has the power to extract packing at the same rate as the
larger bulky 15,000 and 20,000 psi systems, and compares favorably to the engine
driven triplex pumping systems. This feat is accomplished by the principle that
a short pre-engineered burst of high pressure water will clean, and in this case
extract, faster than a constant stream. This system requires less pressure and
flow to extract hardened packing.
Size: 24”W x 14”D x 18”H Weight: 96 lbs Air
Requirements: 150 psi @ 60 cfm, Inlet Water: Gravity—60 psi
Discharge Pressure: High Energy Ultrasonic Burst Pressure of 4500 to 6000
psi. Equivalent to 15K to 20K Pressure, Flow Rate: Per
Pulse—8 Cu. In.
Construction: Rugged Bosch frame, access panels for easy maintenance
Item No.: 8205-6000-00
The 22,000 PSI contractor grade unit has the power to remove the hardest packings. This unit is very mobile, enabling you to move through a plant more efficiently, the onboard fluid reservoir can be used in remote plant areas. The reservoir can also be filled with mineral oil when extracting in super cold services or where water cannot be utilized.
The Pro-Grade L9000 is the choice of contractors for projects with a large number of valves to be extracted, extracts packings faster utilizing the higher pressures available to the user.
This machine is the choice of our onsite field service crews for use in petro-chemical plants, refineries, sugar refineries, pulp and paper mills and power generation plants. The additional pressure ensures all packing is removed from stuffing box and also gives the technician the ability to clean the exterior and interior components with a constant flow rate.
Item No.: 8205-9000-00
Fluid Sealing Service offers support, service and a full range of accessories:
Gun Repair Kits - Safety Shroud Gun and Machine Adapters - 25K to 50K High Pressure Hoses -
HP Jetting Nozzles w/Sapphire Orifices - Operator PPE